Lawn mower die casting

Nom de la pièce
Lawn mower die casting
Matériau
ADC12
Poids
806g
Norme de tolérance
ISO 2768-mk
Équipement de production
400T Die Casting Machine
Finition de surface
Pulvérisation
Lieu de production
Guangdong, Chine
Service
OEM
Route de fabrication
Moulage sous pression - ébavurage - CNC - Pulvérisation
Domaine d’application
Outils électriques

What costs need to be considered when producing general die casting products?Cost efficiency is a major requirement in any industrial product in combination with other requirements. The factors that are considered for the estimation of die cast parts are as follows:
MatériauThe material being used for the production of general die cast parts is a major influence on the cost of the process. Good quality and cost-efficient metal alloys are used for these products.
Production quantityThe general die cast part is cost efficient if it is being produced in large quantities. Production of small quantity products is a set back as it is a waste of resources over very little income. The quantity of production is also a factor that changes the cost of production.
FinishingIf the general die cast part needs finishing or surface treatments after production, it also increases the cost of production.

What are the rules for creating good designs for general die castings?Techniques that ensure good designs for general die casting parts to abide by strict standards, including but not limited to the following rules:
· There should be no undercuts.
· The walls of the die casted part should have a uniform thickness.
· Parts should have curved surfaces in order to avoid any faults due to sudden changes in direction of flow.
· Bosses should be added to the general die parts in order to avoid additional machining.
· Adequate draft angles and fillets should be added.
· There should be openings for any additions post-production.
· Proper identification of the general die cast part should be observed.